HOME INDUSTRY NEWS Principles for maintenance of automotive air conditioning harness systems

Principles for maintenance of automotive air conditioning harness systems

Car air conditioning harness system maintenance should follow the principles:

 

1. Remove the battery negative lead to prevent short circuit.

 

2. The wire connector should be inserted firmly.

 

3. When arranging the wire harness through the plate hole, first install a rubber sleeve at the hole to protect the wire harness.

 

4. Connect the air conditioning harness to the main harness with a vinyl strip or original clamp.

 

5. If the original harness has been disassembled or removed during maintenance, it should be replaced.

 

6. When installing, be careful not to press the original clamp and the air conditioner harness.

 

7. When brazing the wire onto the wire harness, the diameter of the two wires should be the same and wrap the insulation tape around the joint.

 

8. Harnesses are not allowed to be near moving parts or hot parts.

 

9. The connection site is not allowed to be close to the fuel line.

 

10. Check that the harness is in contact with sharp edges or edges.